Kia Soul: Inhibitor Switch. Removal
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch. Removal
| 1. |
Place the shift lever into the "N" position.
|
| 2. |
Disconnect the battery negative (-) cable.
|
| 3. |
Remove the air cleaner.
(Refer to Engine Mechanical System - "Air cleaner")
|
| 4. |
Disconnect the inhibitor switch connector (A).
|
| 5. |
Remove the shift cable mounting nut (B).
|
| 6. |
Remove the manual control lever (B) and the washer after removing
a nut (A).
|
| 7. |
Remove the inhibitor switch (A) after removing the bolts (2ea).
|
Inhibitor Switch. Inspection
•
Thoroughly check connectors for looseness, poor connection,
bending, corrosion, cont ...
Inhibitor Switch. Installation
1.
Check that the shift lever is placed in the "N" position
2.
Install the inhibitor switch (A).
...
See also:
Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start
the engine). Any light that does not illuminate should be checked by an authorized
Kia dealer.
After starting the en ...
Calendar Settings
This menu is used to set the date (MM/DD/YYYY).
Select [Calendar Settings]
Set through
TUNE knob
Press
TUNE knob
❈ Adjust the number currently in focus to make the s ...
Prompt Feedback
This feature is used to change voice command feedback between Normal and Expert
modes.
Select [Prompt Feedback]
Set through
TUNE knob
On : This mode is for beginner users and provides d ...