Kia Soul: Hazard Lamp Switch Removal - Lighting System - Body Electrical SystemKia Soul: Hazard Lamp Switch Removal

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Lighting System / Hazard Lamp Switch Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the center airvent assembly (A).
3.
Disconnect the connector (A) from the center airvent assembly.
4.
Remove the hazard switch (A) from the center airvent assembly.
    Hazard Lamp Switch Inspection
    1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to ...

    Hazard Lamp Switch Installation
    1. Install the hazard switch in the center airvent assembly. 2. Connect the connector and install the center airvent assembly. ...

    See also:

    Before starting
    Close and lock all doors. Position the seat so that all controls are easily reached. Buckle your seat belt. Adjust the inside and outside rearview mirrors. Be sure that all lights work. C ...

    Blower OFF
    Push the OFF button to turn off the blower. However you can still operate the mode and air intake buttons as long as the ignition switch is in the position ON. ...

    Good driving practices
    Never take the vehicle out of gear and coast down a hill. This is extremely hazardous. Always leave the vehicle in gear. Don't "ride" the brakes. This can cause them to overheat ...