Kia Soul: Hazard Lamp Switch Inspection
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Lighting System / Hazard Lamp Switch Inspection
| 1. |
The SJB can be diagnosed by using the GDS. The SJB communicates
with the GDS which then displays inputs and outputs along with codes.
It will be able to diagnose defects of hazard lamp switch
with GDS quickly. GDS can operates actuator forcefully, input/output
value monitoring and self diagnosis.
|
| 2. |
To diagnose the SJB function, select the vehicle model, BCM
and SJB.
|
| 3. |
To consult the present input/out value of SJB, "Current DATA".
It provides information of SJB input/output conditions.
|
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the connector.
2.
Install the lens after tightening 2 screws.
...
Hazard Lamp Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center airvent assembly (A).
...
See also:
Fuse/relay panel description
Inner fuse panel
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
Engine compartment fuse panel
Engine 1.6
Engine 2. ...
Headlamp escort
If you turn the ignition switch to the ACC or OFF position with the headlights
ON, the headlights remain on for about 20 minutes. However, if the driver’s door
is opened and closed, the headligh ...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignition ...