Removal
1. |
Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line").
|
2. |
Remove the rear seat cushion.
|
3. |
Remove the fuel pump service cover (A).
|
4. |
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
|
5. |
Disconnect the fuel feed tube quick connector (C).
|
6. |
Lift the vehicle and support the fuel tank with a jack.
|
7. |
Disconnect the center muffler hangers (A).
|
8. |
Disconnect the fuel filler hose (A).
|
9. |
Disconnect the vapor tube quick-connector (A).
|
10. |
Remove the parking brake cable RH bracket mounting bolts (A) to obtain space for removing the fuel tank.
|
11. |
Remove the fuel tank from the vehicle after removing the fuel tank band (A).
|
Installation
1. |
Install in the reverse order of removal.
Fuel tank band mounting bolt:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
|
|
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedu ...
Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery cable.
...
See also:
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...
CVVT & Camshaft Installation
1.
Install the intake CVVT (A) to the intake camshaft.
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)
...
Air conditioning
Push the A/C button to turn the air conditioning system on (indicator light will
illuminate).
Push the button again to turn the air conditioning system off. ...