Removal
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
|
2. |
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).
|
3. |
Remove the head assembly (A) after releasing the cushion fixing clip (B).
|
4. |
Disconnect the fuel tube connector (A).
|
5. |
Remove the reservior-cup (B) after releasing the fixing hooks (A).
|
6. |
Disconnect the fuel tube quick-connector (A).
|
7. |
Release the fixing hooks, and then remove the pre-filter (B).
|
8. |
Remove the fuel pressure regulator (A) and fuel pump motor (B).
|
Installation
1. |
Install in the reverse order of removal.
|
Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery cable.
...
Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
...
See also:
Brake/clutch (if equipped) fluid
Check the brake fluid level in the brake fluid reservoir. The level should be
between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake
fluid conforming to DOT 3 ...
Trip interruption
Trip interruption expense benefits are provided in the event that a warranty-related
disablement occurs more than 150 miles from your home, and the repairs require more
than 24 hours to complete. ...
Rear Back Armrest Replacement
•
Put on gloves to protect your hands.
...