Kia Soul: Front Wiper Motor Removal
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Windshield Wiper/Washer / Front Wiper Motor Removal
1. |
Loosen the windshield wiper arm nut (B) after removing a wiper
cap (A).
|
2. |
Remove the windshield wiper arm and blade.
|
3. |
If necessary, release the wiper blade fixing clip by pulling
up and remove the wiper blade from the inside radius of wiper arm.
|
4. |
Disconnect the washer hose (A) connected to cowl top cover.
|
5. |
Remove the weather strip and the cowl top cover (A) after
removing 5 rivets.
|
6. |
Remove the windshield wiper motor and linkage assembly (A)
after removing 2 bolts.
|
7. |
Disconnect the wiper motor connector (A) from the wiper motor
& linkage assembly.
|
8. |
Hold the wiper motor crank arm and remove the upper linkage
(A) from the wiper motor crank arm.
|
9. |
Remove the lower linkage (A) from the wiper motor crank arm.
|
10. |
Hold the arm to use the plyer, remove the crank arm (A) after
loosening the mounting nut.
|
11. |
Remove the wiper motor (A) after loosening the mounting bolts.
|
Front Wiper Motor Component Location
1. Cap 2. Nut 3. Wiper arm & blade 4. Rivet 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...Front Wiper Motor Installation
1. Install the wiper motor. 2. Install the crank arm. ...See also:
Glove box
To open the glove box, pull the handle and the glove box will automatically open.
Close the glove box after use.
Always keep the glove box closed while the vehicle is in operation. ...
Climate control air filter
The climate control air filter installed behind the glove box filters the dust
or other pollutants that come into the vehicle from the outside through the heating
and air conditioning system. If ...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable ...