Kia Soul: Front Strut Assembly Replacement - Front Suspension System - Suspension SystemKia Soul: Front Strut Assembly Replacement

Kia Soul 2014-2019 PS Service Manual / Suspension System / Front Suspension System / Front Strut Assembly Replacement

1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

  
•
Be careful not to damage to the hub bolts when removing the front wheel and tire (A).
3.
Loosen the bolts (A, B), and then remove the wheel speed sensor.
Tightening torque:
(A) 6.8 ~ 10.7N.m (0.7 ~ 1.1kgf.m, 5.0 ~ 7.9lb-ft)
(B) 8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1lb-ft)

4.
Loosen the brake hose bracket bolts (A).
Tightening torque:
8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1lb-ft)

5.
Disconnect the stabilizer link (A) from the front strut assembly after loosening the nut (B).
Tightening torque:
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3~86.8lb-ft)

6.
Remove the cowl top cover.
(Refer to Body - "Cowl Top Cover")
7.
Disconnect the front strut assembly (A) from the knuckle by loosening the bolt & nut.
Tightening torque:
137.3 ~ 156.9N.m(14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)
8.
Remove the front strut assembly and then loosen the strut mounting nuts (A).
Tightening torque:
44.1 ~ 58.8N.m(4.5 ~ 6.0kgf.m, 32.5~43.4lb-ft)

9.
Installation is the reverse of removal.
    Front Strut Assembly Components
    1. Strut assembly 2. Insulator 3. Strut bearing 4. Spring upper pad 5. Coil spring 6. Dust cover 7. Bumper rubber 8. Spring lower pad ...

    Front Strut Assembly Disassembly
    1. Using the special tool (09546-26000), compress the coil spring (A). Tightening torque: 58.8 ~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6l ...

    See also:

    Favorites
    Press the key  Select [Favorites] 1) Saved favorite contact : Connects call upon selection 2) To add favorite : Downloaded contacts be saved as favorite. To save Favorite, contac ...

    SS-A Solenoid Valve(ON/OFF). Inspection
    1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector (A). 3. Measure resistance bet ...

    Parking brake
    Checking the parking brake Check the stroke of the parking brake by counting the number of “clicks’’ heard while fully applying it from the released position. Also, the parking brake alon ...