Kia Soul: Field Effect Transistor (FATC) Replacement
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
|
3. |
Disconnect the connector (A) and then remove the field effect
transistor (B) after loosening the mounting screws.
|
4. |
Install in the reverse order of removal.
|
Field Effect Transistor (FATC) Inspection
1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. ...Climate Control Air Filter Description
The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust fi ...See also:
Rail Pressure Sensor (RPS). Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures
the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built ...
Check spark plugs and ignition system
Inspect your spark plugs as described in section 7 and replace them if necessary.
Also check all ignition wiring and components to be sure they are not cracked, worn
or damaged in any way. ...
Knock Sensor (KS). Knock Sensor (KS).
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the engine room under cover.
(Re ...