Kia Soul: Evaporator Temperature Sensor Inspection - Air conditioning System - Heating,Ventilation And Air ConditioningKia Soul: Evaporator Temperature Sensor Inspection

Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Evaporator Temperature Sensor Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistance between terminal “+” and “-” of the evaporator temperature sensor.

Specification
Evaporator core temperature
[°C (°F)]
 Resistance[KΩ]
 Voltage[V]
-10 (14)
 43.35
 2.93
0 (32)
 27.62
 2.40
10 (50)
 18.04
 1.88
20 (68)
 12.11
 1.44
30 (86)
 8.30
 1.08
40 (104)
 5.81
 0.81

4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn the A/C switch ON, then measure the voltage between the terminals of the harness connector.
    Evaporator Temperature Sensor Description
    The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling ...

    Evaporator Temperature Sensor Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove it console side cover (A) by pushing it rearward. [RH] ...

    See also:

    Front Stabilizer Bar Replacement
    1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Loosen the bolt (A) and then disco ...

    Manifold Absolute Pressure Sensor (MAPS). Specifications
    Specification Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 20.0 (0.20, 2.9) 0.79 46.7 (0.47, 6.77) 1.84 101.3 (1.03, 14. ...

    Sliding the sunroof
    To open or close the sunroof (manual slide feature), pull or push the sunroof control lever backward or forward to the first detent position. Pulling the control lever downward also closes the su ...