Kia Soul: Cooling Fan Disassembly - Cooling System - Engine Mechanical SystemKia Soul: Cooling Fan Disassembly

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Disassembly

1.
Remove the cooling fan (A) from the cooling fan assembly.

2.
Disconnect the fan motor connector (A) from the resistor.

3.
Remove the fan motor (A) from the cooling fan shroud.
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

4.
Assemble in the reverse order of disassembly.
    Cooling Fan Removal and Installation
    Cooling fan assembly 1. Disconnect the battery negative terminal. 2. Remove the air duct (A). 3. Se ...

    Cooling Fan Inspection
    Fan Motor 1. Disconnect the fan motor connector from the resistor. 2. Connect the battery voltage to the "+" terminal and ...

    See also:

    Front Seat Assembly Component Location
    1. Front seat assembly ...

    Front Seat Back Cover Replacement
       • Put on gloves to protect your hands. ...

    Headlamp escort (if equipped)
    If you turn the ignition switch to the ACC or OFF position with the headlights ON, the headlights remain on for about 5 minutes. However, if the driver’s door is opened and closed, the headlight ...