Kia Soul: Control Shaft Complete Removal
1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
3. |
Set shift lever to "N" position.
|
4. |
Remove the control cable from the control shaft after remove the
pin (A) and washer (B).
|
5. |
Remove the control shaft assembly after loosen the bolts.
|
Control Shaft Complete Description
Component location : Control shaft assembly is mounted on the top of the manual transaxle Function : Change the gear by shifting a shift lever. ...Control Shaft Complete Installation
1. Install in the reverse order of removal. • ...See also:
Line Pressure Control Solenoid Valve. Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector (A).
3.
Measure resistance bet ...
Emergency Fastening Device (EFD). Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
To remove the emergency fastening ...
Input Speed Sensor. Installation
1.
Install in the reverse order of removal.
•
...