Kia Soul: Accelerator Position Sensor (APS). Specifications
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS). Specifications
Specification
Accelerator Position |
Output Voltage (V)
[Vref = 5V] |
|
APS1 |
APS2 |
|
C.T |
0.7 ~ 0.8 |
0.28 ~ 0.48 |
W.O.T |
3.85 ~ 4.35 |
1.8 ~ 2.3 |
Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important senso ...Accelerator Position Sensor (APS). Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...See also:
Height Adjust Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening th ...
TJ Joint Installation
1.
Wrap tape around the driveshaft spline(TJ) to prevent damage to
the boot.
2.
Using the alignment marks (D) made during disassembly as a ...
Components Operations
PCM (Power Train Control Module)
1.
The PCM(ECM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the ...