Kia Soul: Variable Intake Solenoid (VIS) Valve. Description and Operation
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve. Description and Operation
Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake
manifold. The VIS valve controls the vacuum modulator which activates a valve
in the intake manifold. The ECM opens or closes this valve according to engine
condition (Refer to below table).
55555
| Engine condition |
VIS valve |
Operation |
| Medium speed |
Closed |
Increasing engine performance in low engine speed
by reducing intake interference among cylinders |
| Low / High speed |
Open |
Minimizing intake resistance by shortening intake
manifold length and increasing area of air entrance |
CVVT Oil Control Valve (OCV). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the ...
Variable Intake Solenoid (VIS) Valve. Specifications
Specification
Item
Specification
Coil resistance (Ω)
30.0 ~ 35.0 [20°C(68°F)]
...
See also:
Floor mat anchor(s)
When using a floor mat on the floor carpet, make sure it attaches to the floor
mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward.
WARNING - After market floor mat
Do ...
Emergency tailgate safety release
Your vehicle is equipped with an emergency tailgate safety release lever located
on the bottom of the tailgate. When someone is inadvertently locked in the cargo
area, the tailgate can be open ...
Roof Antenna Installation
1.
Connect the roof antenna connectors.
2.
Install the rear roof trim.
3.
Connect the ...