Kia Soul: Spark Plug Replacement - Power Train - MaintenanceKia Soul: Spark Plug Replacement

Kia Soul 2014-2019 PS Service Manual / Maintenance / Power Train / Spark Plug Replacement

1.
Remove the ignition coil.
2.
Using a spark plug wrench, remove the spark plug (A).
  
Be careful that no contaminants enter into spark plug holes.

3.
Install in the reverse order of removal.

Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)

    Spark Plug On-vehicle Inspection
    1. Perform spark test (1) Remove the engine cover. (2) Remove the ignition coils. ...

    Valve Clearance Inspection
    Inspect for excessive valve noise and/or engine vibration and adjust if necessary. ...

    See also:

    Battery Temperature Sensor Description and Operation
    Description Installed in the high voltage battery module, Battery Temperature Sensor transfers temperature of each battery module to BMS ECU. ...

    Inhibitor Switch. Specifications
    ▷ Type: Combination of output signals from 4 terminals Power supply (V) 12 Output type Combination of output signals Signal Code Table ...

    Refrigerant Leak Test
    Always conduct a leak test with an electronic leak detector whenever leakage or refrigerant is suspected and when conducting service operations which are accompanied by disassembly or looseni ...