Kia Soul: If you have a flat tire (with tire mobility kit) - What to do in an emergencyKia Soul: If you have a flat tire (with tire mobility kit)

Kia Soul 2009-2013 AM Owner's Manual / What to do in an emergency / If you have a flat tire (with tire mobility kit)

For safe operation, carefully read and follow the instructions in this manual

For safe operation, carefully read and follow the instructions in this manual before use.

(1) Compressor
(2) Sealant bottle

The Tire Mobility Kit is a temporary fix to the tire and the tire should be inspected by an authorized Kia dealer as soon as possible.

CAUTION - One sealant for one tire

When two or more tires are flat, do not use the tire mobility kit because the supported one sealant of Tire Mobility Kit is only used for one flat tire.

WARNING - Tire wall

Do not use the Tire Mobility Kit to repair punctures in the tire walls. This can result in an accident due to tire failure.

WARNING - Temporary fix

Have your tire repaired as soon as possible. The tire may loose air pressure at any time after inflating with the Tire Mobility Kit.

Changing tires
1. Park on a level surface and apply the parking brake firmly. 2. Place the transaxle shift lever in R (Reverse) with manual transaxle or P (Park) with automatic transaxle. 3. Activate the hazar ...

Introduction
With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture. The system of compressor and sealing compound effectively and comfortably seals most punctures in a passenger c ...

See also:

TJ Joint Components
[LH] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Shaft 6. TJ boot band 7. TJ boot 8. Spider assembly 9. Snap ring 10. TJ h ...

CVVT & Camshaft Inspection
Camshaft 1. Measure the height of the cam lobe using a micrometer and check the surface of the cam lob for wear and tear. If necessary, replace the camshaft. ...

Condenser Inspection
1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdrive ...