Kia Soul: Seat Heater Switch Inspection - Seat Electrical - Body Electrical SystemKia Soul: Seat Heater Switch Inspection

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Seat Electrical / Seat Heater Switch Inspection

First Row Seat
1.
Disconnect the negative (-) batttery terminal.
2.
Disconnect the A/C & heater controller connectors (A).
(Refer to Heating, Ventilation And Air Conditioning - "Heater & A/C Control Unit (Manual)")
(Refer to Heating, Ventilation And Air Conditioning - "Heater & A/C Control Unit (FATC)")
[FATC type]

[Manual type]
3.
Operate switch and check that continuity exists between the terminals.
If there is no continuity, replace the seat heater switch.
[FATC type]
A.
Heater + Ventilation

[Manual type]
A.
Heater

Second Row Seat
1.
Disconnect the negative (-) batttery terminal.
2.
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
3.
Operate driver seat heater switch and check that continuity exists between the terminals.
If there is no continuity, replace the seat heater switch.
    Seat Heater Switch Installation
    First Row Seat 1. Install the heater & A/C control unit. (Refer to Heating, Ventilation And Air Conditioning - "Heater & A/C Control Uni ...

    Seat Heater (Non-Air Ventilation) Components
    ...

    See also:

    Smart Key Unit Components and Components Location
    Component (1) Connector Pin Information No. Connector A Connector B Connector C 1 V_BAT CPU Assistant side antenna ...

    Tire sidewall labeling
    This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be use ...

    Steering Column Shroud Panel Component Location
    1. Steering column shroud lower panel 2. Steering column shroud upper panel ...