Kia Soul: Locking - Smart key function - Smart key - Features of your vehicleKia Soul: Locking

Kia Soul 2009-2013 AM Owner's Manual / Features of your vehicle / Smart key / Smart key function / Locking

Using the door handle button

Using the door handle button

1.Close all doors, engine hood and tailgate.
2.Press the button of the outside door handle.
3.All doors and tailgate will lock. The hazard warning lights will blink and the chime will sound once.
4.Make sure that doors are locked by checking the door lock button inside the vehicle or pulling the outside door handle.

  • The button will only operate when the smart key is within 28~40in. (0.7~1m) from the outside door handle. • Even though you press the outside door handle button, the doors will not lock and the chime will sound for 3 seconds if any of following occur:
    - The smart key is in the vehicle.
    - The engine start/stop button is in ACC or ON position.
    - Any door except the tailgate is open.

Using the button on the smart key

1 Close all doors, engine hood and tailgate.
2.Press the lock button(1).
3.All doors and tailgate will lock. The hazard warning lights will blink and the chime will sound once.
4.Make sure that doors are locked by checking the door lock button inside or pulling the outside door handle.

    Smart key function
    1.Door lock 2.Door unlock 3.Tailgate unlock 4.Panic (if equipped) ...

    Unlocking
    Using the door handle 1.Press the button of the driver's outside door handle. 2.The driver’s door will unlock. The hazard warning lights will blink and the chime will sound two times. 3.Pre ...

    See also:

    Brake Switch. Adjustment
    Brake switch clearance adjustment If the gap between brake switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the brake swi ...

    Front Wiper Motor Inspection
    Speed Operation Check 1. Disconnect the connector (A) from the wiper motor. 2. Attach the positive (+) lead from ...

    Electrical equipment
    The electrical system of your vehicle is designed to perform under all reasonably expected operating conditions. However, before any additional electrical equipment is installed in your vehicle, co ...