Kia Soul: Replacement
1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
3. |
Remove the airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
4. |
Disconnect the connector & lock nut (A) and then remove the steering
wheel by using special service tools (09561-11001).
|
5. |
Installation is the reverse of the removal.
|
Component
1. Airbag module 2. Remote control upper switch 3. Remote control lower switch 4. Steering wheel assembly 5. Heated unit 6. Wiring 7. Steering wheel lower co ...Disassembly
1. Loosen the screw (A-6ea) and then remove the lower cover (B) from the steering wheel body. 2. Remove the wiring (A) & Heated ...See also:
Timing Chain Installation
1.
Dowel pin of crankshaft should be positioned at 3° in relation
to vertical center line.
2.
Align the TDC marks (A) of the CVVT ...
TJ Joint Installation
1.
Wrap tape around the driveshaft spline(TJ) to prevent damage to
the boot.
2.
Using the alignment marks (D) made during disassembly as a ...
BJ Boot Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refe ...