Kia Soul: Parking Brake Cable. Removal
Kia Soul 2014-2019 PS Service Manual / Brake System / Parking Brake System / Parking Brake Cable. Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
| 1. |
Release the parking brake lever and parking brake cable is loose.
|
| 2. |
Remove the rear console cover (A).
|
| 3. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
| 4. |
Raise the vehicle, and make sure it is securely supported.
|
| 5. |
Remove the rear tire and wheel.
|
| 6. |
Remove the parking brake cable (A), after removing the clip (B).
|
| 7. |
Loosen the parking brake cable bracket bolts and remove the parking
brake cable (A).
|
Parking Brake Lever. Adjustment
Parking Brake Lever Stroke Adjustment
1.
Remove the rear console cover (A).
1.
Apply the brake pedal 20 times with the force of 10kgf af ...
Parking Brake Cable. Installation
1.
Install the parking brake cable (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
See also:
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the
pedal depresses ...
Antenna Removal
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the roof antenna connectors (A).
3.
Disc ...
Starter Removal
1.
Disconnect the battery negative terminal.
2.
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Ro ...