•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
Using a screwdriver or remover, remove the front door quadrant
inner cover (A).

|
2. |
Loosen the outside rear view mirror mounting screw (A).

|
3. |
After loosening the mounting bolts, then remove the outside rear
view mirror (A).
|
4. |
Disconnect the outside rear view mirror connector (B).
Tightening torque :
6.9~10.8 N.m(0.7~1.1 kgf.m, 5.1~8.0 lb-ft)
|

|
5. |
Install in the reverse order of removal.
• |
Make sure the connector is connected properly.
|
• |
Replace any damaged clips.
|
|
|
1. Outside rear view mirror
...
1. Inside rear view mirror
...
See also:
Vacuum crankcase ventilation hoses (if equipped)
Inspect the surface of hoses for evidence of heat and/or mechanical damage. Hard
and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate
deterioration.
Particular at ...
Mood Lamp Installation
[Mood Lamp Unit]
1.
Install the mood lamp unit.
2.
Install the audio head unit.
3.
...
EBD(Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of
the ABS system is to control the effective adhesion utilization by the rear
wheels.
It further utilizes the efficie ...