Kia Soul: On-board Refueling Vapor Recovery (ORVR) valve Installation - Evaporative Emission Control System - Emission Control SystemKia Soul: On-board Refueling Vapor Recovery (ORVR) valve Installation

Kia Soul 2014-2019 PS Service Manual / Emission Control System / Evaporative Emission Control System / On-board Refueling Vapor Recovery (ORVR) valve Installation

1.
Install in the reverse order of removal.
    On-board Refueling Vapor Recovery (ORVR) valve Removal
    1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump&qu ...

    Fuel Filler Cap Description
    A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and the filler ...

    See also:

    Steering Angle Sensor
    The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning directio ...

    Ignition Coil Installation
    1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

    Parking brake - Hand type
    Applying the parking brake To engage the parking brake, first apply the foot brake and then without pressing the release button in, pull the parking brake lever up as far as possible. In addit ...