Kia Soul: License Lamps Removal
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Lighting System / License Lamps Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the license lamp assembly (A) after loosening the mounting
screw.
|
| 3. |
Replace the bulb (B) after removing the license lamp (A).
|
Fog Lamps Installation
1.
Install the front fog lamp bulb.
2.
Connect the front fog lamp connector.
3.
Insta ...
License Lamps Installation
1.
Install the bulb.
2.
Install the license lamp assembly.
...
See also:
SS-A Solenoid Valve(ON/OFF). Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector (A).
3.
Measure resistance bet ...
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt:
26.5 ~ 32.4 N.m (2.7 ~ 3.3 kgf.m, 19.5 ~ 23.9 l ...
Fluid. Components Location
1. Injection hole(eyebolt)
2. Fluid level plug
3. Fluid drain plug
...