Kia Soul: Installation - Horn - Body Electrical SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Horn / Installation

1.
Install the horns after connecting the horn connectors.
2.
Install the front bumper cover.
    Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper ...

    Inspection
    Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. ...

    See also:

    Power windows
    The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls the door's window. The driver has a power window lock button which ...

    In-car Sensor (FATC only)
    The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the r ...

    Alternator Removal
    1. Disconnect the battery negative terminal. 2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove th ...