Kia Soul: Inspection
| 1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
| 3. |
Disconnect the back up lamp switch connector (A).
|
| 4. |
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. When the shift lever is in reverse, there should be continuity.
|
Specification
Item
Specification
Current voltage
13V
Working voltage
DC 10~15V
Operating force
3.0kg Max
Volta ...
Replacement
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray ...
See also:
Clean air(if equipped)
When the ignition switch is in the ON position, the clean air function turns on automatically.
Also, the clean air function turns off automatically, when the ignition switch turns to the OFF posi ...
SRS Control Module (SRSCM). Variant coding
After replacing the SRSCM with a new one, MUST perform the “Variant Coding”
procedure.
1.
...
High Mounted Stop Lamp Installation
1.
Install the high mounted stop lamp.
2.
Install the high mounted stop lamp trim.
3.
...