Kia Soul: Hood Assembly Component Location - Hood - Body (Interior and Exterior)Kia Soul: Hood Assembly Component Location

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Component Location

1. Hood assembly

    Adjustment
    1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by ...

    Hood Assembly Replacement
       • Be careful not to damage the hood and body. ...

    See also:

    Front Door Side Weatherstrip Replacement
    1. Loosen the front door checker (B) mounting bolt. Tightening torque : 16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m,12.3 ~ 15.9 lb-ft) ...

    Front Impact Sensor (FIS). Description
    The Front Impact Sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of ...

    Transaxle Control Module (TCM). Removal
    1. Turn ignition switch OFF. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air cleaner") ...