Kia Soul: High mounted stop light replacement
1. Open the tailgate.
2. Remove the cover.
3. Loosen the retaining bolts.
Bulb type
4. Pull out the module from the high mounted stop light assembly by pulling both clips.
5. Replace the bulbs by pulling it out.
6. Reinstall in the reverse order.
LED type (if equipped)
5.Replace the LED with new one.
6.Reinstall in the reverse order.
Rear combination light bulb replacement
(1) Tail light and side marker
(2) Rear turn signal light
(3) Back-up light
(4) Stop and tail light
(5) Tail light
(6) Tail/Stop light and side marker (LED)
1. Open the tailgate.
2. Loo ...
License plate light bulb replacement
1. Remove the lens by pressing the tabs.
2. Remove the socket from the lens.
3. Remove the bulb by turning it counter clockwise.
4. Install a new bulb in the socket and install the socket to th ...
See also:
Transmitter Code Registration (Using GDS)
1.
Connect the DLC cable of GDS to the data link connector (16
pins) in driver side crash pad lower panel, turn the power on GDS.
...
Fuel Tank Pressure Sensor (FTPS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Spark Plug Description
A spark plug is a device for delivering electric current from an ignition
system to the combustion chamber of a spark-ignition engine to ignite the compressed
fuel/air mixture therein by mean ...