Kia Soul: Fuel Filter Replacement
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
|
2. |
Disconnect the electric pump wiring connector (A) and the fuel
sender connector (B).
|
3. |
Remove the head assembly (A) after releasing the cushion fixing
clip (B).
|
4. |
Disconnect the fuel tube connector (A).
|
5. |
Remove the reservior-cup (B) after releasing the fixing hooks
(A).
|
6. |
Disconnect the fuel tube quick-connector (A).
|
7. |
Release the fixing hooks, and then remove the pre-filter (B).
|
8. |
Remove the fuel pressure regulator (A) and fuel pump motor (B).
|
9. |
Install in the reverse order of removal.
|
Exhaust System Inspection
1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage. 2. Check for unusal exhaust sounds or abnormal ...Fuel lines, hoses and connections Inspection
Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness. ...See also:
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase. This system supplies fresh
filtered air to the crankcase th ...
Installtion
1.
With a knife, scrape the old adhesive smooth to a thickness of
about 2mm (0.08 in.) on the bonding surface around the entire windshield
opening flange:
...
TCM Terminal input/ output signal
Connector [A]
Pin
Description
Condition
Input/output value
Type
Level
22
Overdrive clutch control solenoid valve
(OD/C_VFS)
...