Kia Soul: Front Wheel Speed Sensor. Removal - ESC(Electronic Stability Control) System - Brake SystemKia Soul: Front Wheel Speed Sensor. Removal

Kia Soul 2014-2019 PS Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor. Removal

1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.
Disconnect the front wheel speed sensor connector (A).
4.
Loosen the mounting bolt (A) and then remove the front wheel speed sensor.
Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

5.
Install in the reverse order of removal.
    Front Wheel Speed Sensor. Components
    1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

    Rear Wheel Speed Sensor. Components
    1. Rear wheel speed sensor 2. Extension cable assembly ...

    See also:

    Curtain Airbag (CAB) Module. Installation
    1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

    Lubricants
    Engine Joint Lubricants Quantity Nu 2.0 BJ GRB006 105g (+10g/0) TJ SH06-VX21 140g (+10g/0) Gamma ...

    Input Speed Sensor. Inspection
    1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...