Kia Soul: ESC OFF Switch. Removal - ESC(Electronic Stability Control) System - Brake SystemKia Soul: ESC OFF Switch. Removal

Kia Soul 2014-2019 PS Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC OFF Switch. Removal

1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the lower crash pad switch assembly (A) by pushing it.

4.
Disconnect the connectors (A) from the lower crash pad switch assembly.

5.
Check the continuity between the switch terminals as the ESC OFF switch is engaged.

    ESC OFF Switch. Description
    1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged. ...

    Steering Angle Sensor
    The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning directio ...

    See also:

    Heater & A/C Control Unit (Manual) Component
    Connector Pin Function Connector Pin NO Function Connector Pin NO Function A 1 LOW B 18 IGN2 ...

    GAWR (Gross axle weight rating)
    This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the certification label. The total load on each axle must never exceed its GAWR ...

    Fuse/relay panel description
    Inner fuse panel Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity. Engine compartment fuse panel Engine 1.6 Engine 2. ...