•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
[LH]
1. |
Using a screwdriver or remover, remove the crash pad side cover
[LH] (A).
![](./images/books/1647/spsbd4676n.gif)
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
[RH]
1. |
Using a screwdriver or remover, remove the crash pad side cover
[RH] (A).
![](./images/books/1647/spsbd4679n.gif)
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
[LH]
1. Crash pad side cover [LH]
[RH]
1. Crash pad side cover [RH]
...
1. Crash pad center lower panel
...
See also:
Temperature Control Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel" ...
Vehicle weight glossary
This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer.
Properly loading ...
Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, you must reset your
sunroof system as follows:
1.Turn the ignition switch to the ON position.
2.Close the sunshade and sunroof completel ...