Kia Soul: Component Replacement after Deployment
Kia Soul 2014-2019 PS Service Manual / Restraint / Component Replacement after Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Trouble Code list for repairing of the related DTCs.
|
When the front airbag(s) deployed after a collision, replace the following
items.
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Seat belt pretensioner(s)
|
- |
Emergency fastening device
|
- |
Front impact sensors
|
- |
SRS wiring harnesses
|
- |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
When the side/curtain airbag(s) deployed after a collision, replace the
following items.
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Side impact sensor(s) for the deployed side(s)
|
- |
SRS wiring harnesses
|
After the vehicle is completely repaired, confirm the SRS airbag system
is OK.
- |
Turn the ignition switch ON, the SRS indicator should come on
for about 6 seconds and then go off.
|
Special Service Tools
Tool Name / Number
Illustration
Description
Deployment tool
0957A-34100A
Used for deploying airbag
Deployment adapter
0957A- ...
Precautions
General Precautions
Please read the following precautions carefully before performing the
airbag system service.
Observe the instructions described in this manual, or the airbag ...
See also:
Shift Lever. Installation
1.
Install in the reverse order of removal.
When installing, set room sid ...
Description
Back view camera will activate when the backup light is ON with the
ignition switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the v ...
Transaxle
...