Kia Soul: Brake Line. Components
When installing brake hose, be sure to comply with the torque
specification to prevent twisted hose.
|
Master Cylinder. Installation
Master Cylinder assembly
1.
Install in the reverse order of removal.
2.
After installing, bleed the brake system.
(Refer to Brake s ...
Brake Line. Removal
1.
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
2.
Remove the brake fluid from the master cylinder rese ...
See also:
Front Door Latch Repair procedures
Replacement
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.
...
Tire pressure monitoring system (TPMS)
Low tire pressure telltale / TPMS malfunction indicator
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated to the inflation pressure recommended by the ...
Rear Seat Belt Buckle Repair procedures
Replacement
[LH]
1.
Detach the rear seat belt lower anchor (C) by pushing the lock pin (B) of center mini buckle (A) with flat-tip driver.
2.
Remove the rear seat cushion assembly.
(Refer ...