•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the caps (A) and screws, then remove the assist handle
(B).
![](./images/books/1647/spsbd4732n.gif)
|
2. |
Install in the reverse order of removal.
|
1. Roof Trim Assembly
...
See also:
Transaxle Oil Temperature Sensor. Description
Transaxle oil temperature sensor monitors the automatic transaxle fluid's
temperature and conveys the readings to TCM. It is an NTC (Negative Thermal
Coefficient) sensor whose resistance ...
Telemetics Unit (TMU) Installation
1.
Install the MTS unit after connecting the cable and connector.
2.
Install the glove box housing.
...
Component Location
1. Slide motor
2. Front height motor
3. Rear height motor
4. Recline motor
5. Lumbar support motor
6. Power seat switch
7. Recline switch
8. Lumba ...