Kia Soul: Alternator Disassembly
1. |
Remove the rear cover (A) after removing nuts.
|
2. |
Remove the mounting bolts (A) and the brush holder assembly (B).
|
3. |
Remove the slip ring guide (A) after pulling it.
|
4. |
Remove the OAD(Overrunning Alternator Decoupler) cap.
|
5. |
Remove the OAD(Overrunning Alternator Decoupler) pulley (A) using
the special tool.
|
6. |
Unsolder the 3 stator leads (A).
|
7. |
Remove the 4 through bolts (A).
|
8. |
Disconnect the rotor (A) and bracket (B).
|
Alternator Installation
1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical ...
Alternator Reassembly
1.
Reassemble in the reverse order of disassembly.
•
...
See also:
Air bag collision sensors
(1) SRS control module
(2) Front impact sensors
(3) Side impact sensors
(4) Side pressure sensor
WARNING - Air bag sensors
Do not hit or allow any objects to impact the locations where air b ...
Pairing a Bluetooth® Wireless Technology Device(if equipped)
What is Bluetooth® Wireless Technology Pairing?
Pairing refers to the process of synchronizing your Bluetooth® Wireless Technology
phone or device with the car audio system for connection.
Pairi ...
CVVT Oil Control Valve (OCV). Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated ...