Kia Soul: Alternator Description - Charging System - Engine Electrical SystemKia Soul: Alternator Description

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Alternator Description

The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this alternator is regulated by the battery voltage detection system.
The alternator is regulated by the battery voltage detection system.
The main components of the alternator are the rotor, stator, rectifier, capacitor brushes, bearings and V-ribbed belt pulley.
The brush holder contains a built-in electronic voltage regulator.

1. Brush
2. Overrunning Alternator Decoupler (OAD) pully
3. Rotor
4. Stator
5. Rectifier

    On-vehicle Inpection
       • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accord ...

    Alternator Specification
    Alternator ltem Specification Nominal output 13.5V, 110A Speed in use 1,000 ~ 18,000 rpm Voltage regulator IC Regulator bu ...

    See also:

    Fuel lines, hoses and connections Inspection
    Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness. ...

    Starter Installation
    1. Install in the reverse order of removal. Starter mounting bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...

    Fuel Pump Motor. Repair procedures
    Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") ...