Kia Soul: 35R Clutch Control Solenoid Valve(35R/C_VFS). Inspection
1. |
Turn ignition switch OFF.
|
2. |
Disconnect the solenoid valve connector.
|
3. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
4. |
Check that the resistance is within the specification.
(Refer to 35R Clutch Control Solenoid Valve - "Specifications")
|
35R Clutch Control Solenoid Valve(35R/C_VFS). Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
See also:
Passenger’s front air bag ON/OFF switch
The passenger’s front air bag can be deactivated by the passenger’s front air
bag ON/OFF switch if a child restraint is installed on the front passenger's seat
or if the front passenger& ...
Hands Free Switch Repair procedures
Inspection
1.
Check for resistance between terminals in each switch position.
[Voice + Bluetooth]
[Voice + Bluetooth]
SwitchConnector terminalResistance (±5%)Output voltage (± 0.22)Voice2-4 ...
High Voltage Battery Heater Fuse Description and Operation
High Voltage Battery Heater Fuse
It is connected to battery heater relay switch and it cuts off the circuit in case of overcurrent.
It is installed in the Power Relay Assembly (PRA).Operation
...