Kia Soul: 26 Brake Control Solenoid Valve(26/B_VFS). Removal
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS). Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraulic pressure
will need to be adjusted after replacing the VFS solenoid valve. If
replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
|
26 Brake Control Solenoid Valve(26/B_VFS). Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector (A).
3.
Measure resistance bet ...
Line Pressure Control Solenoid Valve. Description
line pressure control solenoid valve is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside
the line pressure.
...
See also:
Front Disc Brake. Installation
Brake caliper assembly
1.
Install in the reverse order of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000). ...
Compressor Oil Repair procedures
Oil Specification
1.
The HFC-134a system requires synthetic compressor oil (POE)
whereas the R-12 system requires mineral compressor oil. The two oils
must never be mixed.
2.
Compressor oi ...
Checking the tire inflation pressure
1. After driving approximately 7~10 km ( 4~6 miles or about 10 minutes), stop
at a suitable location.
2. Connect connection hose (10) of the compressor directly to the tire valve.
3. Connect bet ...