Kia Soul: Suspension ball joints
Inspection
| 1. |
Check the suspension ball joint.
|
Steering gear rack, linkage and boots
Inspection
1.
Check the steering wheel free road.
(1)
Turn the steering wheel so that the front wheels can face
straight ahead.
...
Tire (pressure & tread wear) Inspection
1.
Check the tire pressure.
(220+7 kPa (32psi+1.0psi)
2.
Check the tire tread wear.
(Refer to Suspension System - "Tire&qu ...
See also:
Manifold Absolute Pressure Sensor (MAPS). Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
...
Removable towing hook (front) (if equipped)
1.Remove the towing hook from the tool case.
2.Remove the hole cover pressing the lower part of the cover on the front bumper.
3.Install the towing hook by turning it clockwise into the hole ...
To keep locks from freezing
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine
into the key opening. If a lock is covered with ice, squirt it with an approved
de-icing fluid to remove the ice. If ...