Kia Soul: Room Lamp Removal - Lighting System - Body Electrical System - Kia Soul 2014-2019 PS Service ManualKia Soul: Room Lamp Removal

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Lighting System / Room Lamp Removal

Room Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.

3.
Separate the room lamp (A) from the roof trim after loosening the screws (2EA).

4.
Remove the room lamp (B) after disconnecting the connector (A).

5.
If it is necessary to replace the bulb, replace the bulb (A) after detching the lamp lens.

Vanity Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the vanity lamp assembly (A).

3.
Remove the vanity lamp assembly (B) after disconnecting the connector (A).

4.
If it is necessary to replace the bulb, replace the bulb (A).

Personal Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the personal lamp assembly (B) after disconnect the connetor (A).

    Room Lamp Inspection
    1. Check that the switch operates properly after disconnecting the room lamp connector (A). Room Lamp Personal Lamp ...

    Room Lamp Installation
    Room Lamp 1. Install the room lamp assembly after connecting the lamp connector. 2. Install the lens after assembling the ...

    See also:

    Seat Belt Buckle Switch (BS). Description
    The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The se ...

    Piston and Connecting Rod Components
    1. Piston ring 2. Piston 3. Piston pin 4. Connecting rod 5. Connecting rod upper bearing 6. Connecting rod lower bearing 7. Connecting rod bearing cap ...

    Vehicle certification label
    The vehicle certification label attached on the driver’s side center pillar gives the vehicle identification number (VIN). ...