Kia Soul: Room Lamp Installation - Lighting System - Body Electrical System - Kia Soul 2014-2019 PS Service ManualKia Soul: Room Lamp Installation

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Lighting System / Room Lamp Installation

Room Lamp
1.
Install the room lamp assembly after connecting the lamp connector.
2.
Install the lens after assembling the bulb.
Personal Lamp
1.
Install the personal lamp assembly after connecting the lamp connector.
Vanity Lamp
1.
Install the vanity lamp assembly after connecting the lamp connector.
    Room Lamp Removal
    Room Lamp 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) from the room lamp with a flat-tip ...

    Overhead Console Lamp Inspection
    1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

    See also:

    Purge Control Solenoid Valve (PCSV). Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between th ...

    Antenna Coil Installation
    1. Install the coil antenna and connect the 6P connector. 2. Install the crash pad lower panel. 3. ...

    Auto stop
    To stop the engine in idle stop mode Stop the vehicle completely by pressing the brake pedal. You must reach a speed of at least 5 mph (8 km/h) since last idle stop. The engine will stop and th ...