Kia Soul: Power Seat Motor Inspection - Seat Electrical - Body Electrical SystemKia Soul: Power Seat Motor Inspection

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Seat Electrical / Power Seat Motor Inspection

Power Seat Motor
1.
Disconnect the connectors for each motor.
(Refer to Body - "Front Seat Assembly")
A : Slide motor
B : Front height motor
C : Rear height motor
D : Recline motor
E : Lumbar support motor

2.
With the battery connected directly to the motor terminals, check if the motors run smoothly.
3.
Reverse the connections and check that the motor turns in reverse.
4.
If there is an abnormality, replace the motors.

Reclining Motor Limit Switch
1.
Disconnect the limit switch and operate the limit switch.
2.
Check for continuity between the terminals.
3.
Make sure that the seat operation is normal in the reverse after the maximum operation.
4.
If there is an abnormality, replace the limit switch.

    Component Location
    1. Slide motor 2. Front height motor 3. Rear height motor 4. Recline motor 5. Lumbar support motor 6. Power seat switch 7. Recline switch 8. Lumba ...

    See also:

    Replacement
    1. Uplift the vehicle with lift. 2. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") ...

    Electronic stability control (ESC)
    The Electronic Stability control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC ap ...

    Ambient Temperature Sensor Description
    The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, ...