Kia Soul: Installation - BCM (Body Control Module) - Body Electrical SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / BCM (Body Control Module) / Installation

1.
Connect the connectors and install the BCM.
2.
Install the glove box housing and audio/AVN head unit.
3.
Connect the negative (-) battery teriminal.
    Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the audio/ AVN head unit assembly. (Refer to Body Electrica ...

    BCM Diagnosis With GDS
    1. The body control module can diagnose by using the GDS more quickly. The BCM communicates with the GDS and then reads the input/output value and dr ...

    See also:

    Transaxle Control Module (TCM). Inspection
    TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side c ...

    Starting the engine
    WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots, etc.) may interfere with your ability to use the brake, accelerator and clutch ped ...

    Closing the hood
    1. Before closing the hood, check the following: All filler caps in the engine compartment must be correctly installed. 2. Lower the hood halfway and push down to securely lock in place. WARNING ...