Kia Soul: BCM Diagnosis With GDS - BCM (Body Control Module) - Body Electrical System - Kia Soul 2014-2019 PS Service ManualKia Soul: BCM Diagnosis With GDS

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Body Electrical System / BCM (Body Control Module) / BCM Diagnosis With GDS

1.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output value and drives the actuator.
2.
To diagnose the BCM function, select the menu of model and body control module.
3.
Select "Input/output monitoring", if you will check current data of body network system. It provides input/output status of each module.
A.
BCM service data, CLU service data, SJB service data
4.
If you will check each module data operation forcefully, select "Actuation test".

5.
If you want to change user option, select “user option”.

    Installation
    1. Connect the connectors and install the BCM. 2. Install the glove box housing and audio/AVN head unit. ...

    See also:

    Rear Coil Spring Replacement
    1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...

    Auto stop
    Type A Type B To stop the engine in idle stop mode Stop the vehicle completely by pressing the brake pedal. You must reach a speed of at least 5 mph (8 km/h) since last idle stop. The engine ...

    Immobilizer Control Unit Installation
    1. Install the immobilizer control unit after connecting the unit connector. 2. Install the main crash pad assembly. ...