Kia Soul: Inspection (With GDS) - Multifunction Switch - Body Electrical SystemKia Soul: Inspection (With GDS)

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Multifunction Switch / Inspection (With GDS)

1.
Check IPM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch.
2.
If diagnosis is required on the multifunction switch, select model and "IPM".

3.
Select "Current data" and check the input/output condition of "Multifunction switch".

4.
To perform test on "Multifunction switch" outputs, select "Actuation test".

    Inspection
    Lighting Switch Inspection 1. With the multi function switch in each position, make sure that continuity exists between the terminals below. If conti ...

    See also:

    Alternator Components
    1. Overrunning Alternator Decoupler (OAD) pully 2. Front bracket 3. Front bearing 4. Stator 5. Rotor 6. Rear bearing 7. Rear housing 8. Regulator assembly 9. Thr ...

    TCM Terminal input/ output signal
    Connector [A] Pin Description Condition Input/output value Type Level 22 Overdrive clutch control solenoid valve (OD/C_VFS) ...

    Good driving practices
    Never take the vehicle out of gear and coast down a hill. This is extremely hazardous. Always leave the vehicle in gear. Don't "ride" the brakes. This can cause them to overheat ...