Kia Soul: 30,000 miles or 24 months - Normal maintenance schedule - Scheduled maintenance service - Maintenance - Kia Soul 2009-2013 AM Owner ManualKia Soul: 30,000 miles or 24 months

First generation AM (2010–2013) / Kia Soul 2009-2013 AM Owner Manual / Maintenance / Scheduled maintenance service / Normal maintenance schedule / 30,000 miles or 24 months

❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped)
❑ Inspect cooling system *1
❑ Inspect drive shaft and boots
❑ Inspect fuel filter *2
❑ Inspect fuel line, hoses and connection
❑ Inspect fuel tank air filter *2
❑ Inspect manual transaxle fluid (if equipped) (Every 37,500 miles (60,000 km) or 48 months)
❑ Inspect vapor hose and fuel filler cap
❑ Inspect visually the following items
1) Battery condition
2) Brake fluid / clutch (if equipped) fluid
3) Brake lines, hoses and connections
4) Brake pedal and operation
5) Chassis/body nuts and bolts
6) Drum brake and linings (if equipped)
7) Disc brakes and pads (if equipped)
8) Exhaust pipe and muffler
9) Front suspension ball joints
10) Fuel tank, cap, lines and hoses
11) Lubricate all locks and hinges
12) Parking brakes
13) Steering operation and linkage
14) Suspension mounting bolts
❑ Replace air cleaner filter
❑ Replace climate control air filter (if equipped)
❑ Replace engine oil and filter (Every 7,500 miles or 12 months)
❑ Add fuel additive *6 (Every 7,500 miles or 12 months)
❑ Rotate tires - including tire pressure and tread wear (Every 7,500 miles or 12 months)

    15,000 miles or 12 months
    ❑ Inspect air cleaner filter ❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped) ❑ Inspect cooling system *1 ❑ Inspect dri ...

    45,000 miles or 36 months
    ❑ Inspect air cleaner filter ❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped) ❑ Inspect cooling system *1 ❑ Inspect dri ...

    See also:

    Heated Oxygen Sensor (HO2S). Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between th ...

    Blower OFF
    Push the OFF button to turn off the blower. However you can still operate the mode and air intake buttons as long as the ignition switch is in the position ON. ...

    Refrigerant label
    The refrigerant label is located on the underside of the hood. ...