Kia Soul: Inspection
Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Electro Chromic Inside Rear View Mirror / Inspection
Check it by the procedure below to see if the function of the ECM
is normal.
| 1. |
Turn the ignition key to the "ON" position.
|
| 2. |
Cover the forward facing sensor.
|
| 3. |
Head a light to the rearward looking sensor.
|
| 4. |
The ECM should be darkened as soon as the rearward looking
sensor detects the light.
|
| 5. |
When the reverse gear is engaged, the ECM should not be darkened.
When heading lights to both the forward facing and rearward
looking sensors, the ECM should not be darkened.
|
Automatic-dimming Function
To protect your vision during nighttime driving, your mirror will
automatically dim upon detecting glare from the vehicles traveling behind
you. The auto-dimming function can be controlled ...
Removal
1.
Remove the mirror wiring cover (A).
2.
Disconnect the ECM mirror connector (B).
3.
...
See also:
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels al ...
Electronic stability control (ESC)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle
during cornering maneuvers. ESC checks where you are steering and where the vehicle
is actually going. ESC appl ...
Front Wheel Speed Sensor. Removal
1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...