Kia Soul: Automatic transaxle Replacement - Power Train - MaintenanceKia Soul: Automatic transaxle Replacement

Kia Soul 2014-2019 PS Service Manual / Maintenance / Power Train / Automatic transaxle Replacement

1.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Remove the drain plug (A) and drain the ATF totally and then reinstall the drain plug.
  
Must be replaced with new gasket when installing the drain plug.

Drain plug tightening torque:
33.3 ~ 43.1 N.m (3.4 ~ 4.4 kgf.m, 24.6 ~ 31.8 lb-ft)

3.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
4.
Remove the eyebolt (A).

Tightening torque :
2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)

5.
Fill the fluid about 5 liters through injection hole.
6.
Perform the fluid level check.
(Refer to Hydraulic System - "Fluid")
    Automatic transaxle Inspection
    Fluid level Check    Automatic Transaxle Fluid(ATF) oil level check is usually unnecessary during scheduled s ...

    Battery Inspection
    Battery Terminal 1. Move back and forth to check that the battery terminals (A) are loose or corroded. If the terminals are corroded, clean them. ...

    See also:

    Satellite radio reception
    You may experience difficulties in receiving SIRIUS satellite radio signals in the following situations. If you are driving in a tunnel or a covered parking area. If you are driving beneath ...

    Engine Room Under Cover Removal and Installation
    Engine Room Under Cover 1. Remove the engine room under cover (A). Tightening torque: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft ...

    Telemetics Unit (TMU) Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Hou ...