Kia Soul: Flywheel Removal and installation - Cylinder Block - Engine Mechanical SystemKia Soul: Flywheel Removal and installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cylinder Block / Flywheel Removal and installation

1.
Remove the manual tranaxle.
(Refer to Manual Transaxle System - "Manual Transaxle ")
2.
Remove the flywheel (A).

Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.
    Flywheel Components
    1. Fly Wheel ...

    Water Jacket Seperator Components
    1. Water Jacket Seperator ...

    See also:

    Warning Lamp Activation
    Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. T ...

    Battery Adjustment
    Battery Charging In general, vehicle battery charging system has three forms. 1. Constant current charge: The battery voltage gradually rises by charging with setti ...

    Fog Lamps Inspection
    Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as speci ...