Kia Soul: Audio Unit Inspection - Audio - Body Electrical System - Kia Soul 2014-2018 PS Service ManualKia Soul: Audio Unit Inspection

Second generation PS (2014-2018) / Kia Soul 2014-2018 PS Service Manual / Body Electrical System / Audio / Audio Unit Inspection

1.
Check the specified value of AVN head unit connectors in specified condition.
Standard type
Connector A
No.
Name
Terminal Description
Condition
Specified Condition
A1
Rear left speaker (+)
Loudspeaker Rear Left+
Needed connection to the car
Analog output
A2
Front left speaker (+)
Loudspeaker Front Left+
Needed connection to the car
Analog output
A3
Front right speaker (+)
Loudspeaker Front Right+
Needed connection to the car
Analog output
A4
Rear right speaker (+)
Loudspeaker Rear Right+
Needed connection to the car
Analog output
A5
-
-
 
 
A6
-
-
 
 
A7
-
-
 
 
A8
Illumination (+)
Rheostat from vehicle +
Needed connection to the car
 
A9
Detent
Detent
Needed connection to the car
 
A10
Rear left speaker (-)
Loudspeaker Rear Left-
Needed connection to the car
Analog output
A11
Front left speaker (-)
Loudspeaker Front Left-
Needed connection to the car
Analog output
A12
Front right speaker (-)
Loudspeaker Front Right-
Needed connection to the car
Analog output
A13
Rear right speaker (-)
Loudspeaker Rear Right-
Needed connection to the car
Analog output
A14
-
-
 
 
A15
-
-
 
 
A16
-
-
 
 
A17
Illumination (-)
Rheostat from vehicle -
Needed connection to the car
 
A18
Remote antenna
Remote Power supply for Antenna
Acc on
9V ~ 18V

Connector B
No.
Name
Terminal Description
Condition
Specified Condition
B1
-
-
 
 
B2
-
-
 
 
B3
-
-
 
 
B4
Steering remocon
Steering Wheel Remote Control
Steering Wheel switch pushed
0.5V ~ 3V
B5
-
-
 
 
B6
USB D (+)
USB D+
USB device is inserted
3.2V ~ 3.45
B7
USB/ iPod VDD
USB /iPod power
USB/iPod device is inserted
4.9V ~ 5.1V
B8
AUX R input
AUX Right Sound Signal
External Auxiliary device is Audio playing (At time of Aux jack use)
A waveform synchronized with sound is output
B9
AUX ground
AUX Reference Ground
Always
Below 1 ohm
B10
Mic (+) (Bluetooth)
Bluetooth MIC+
Input the Voice Signal via MIC
A waveform synchronized with Voice data via MIC
B11
ACC
Accessory
Engine switch on(ACC)
11 ~ 14 V
B12
Battery (+)
Battery
Always
11 ~ 14 V
B13
-
-
 
 
B14
-
-
 
 
B15
-
-
 
 
B16
Vehicle speed
Speed Sensor Signal
Engine switch on(IGN), car is moved slowly
Approx. 5V Level Pulse Generation
B17
Remote control ground
Steering Wheel Remote Control Gnd
Always
Below 1 ohm
B18
USB D (-)
USB D-
USB device is inserted
3.2V ~ 3.45
B19
USB/ iPod ground
iPod detection line
iPod device is inserted
GND
B20
AUX detect
AUX Signal Input Detect
Auxiliary device is inserted
0V(Low) → 5V(High)
B21
AUX L input
AUX Left Sound Signal
External Auxiliary device is Audio playing (At time of Aux jack use)
A waveform synchronized with sound is output
B22
Mic (-) (Bluetooth)
Bluetooth MIC-
Input the Voice Signal via MIC
A waveform synchronized with Voice data via MIC
B23
-
-
 
 
B24
Power ground
Ground
Always
Below 1 ohm

UVO type (Internal amplifier)
Connector A
No.
Name
Terminal Description
Condition
Specified Condition
A1
Rear left speaker (+)
Loudspeaker Rear Left +
Needed connection to the car
Analog output
A2
Front left speaker (+)
Loudspeaker Front Left +
Needed connection to the car
Analog output
A3
Front right speaker (+)
Loudspeaker Front Right +
Needed connection to the car
Analog output
A4
Rear right speaker (+)
Loudspeaker Rear Right +
Needed connection to the car
Analog output
A5
-
-
 
 
A6
-
-
 
 
A7
-
-
 
 
A8
Illumination (+)
Rheostat from vehicle +
Needed connection to the car
 
A9
-
-
 
 
A10
Rear left speaker (-)
Loudspeaker Rear Left -
Needed connection to the car
Analog output
A11
Front left speaker (-)
Loudspeaker Front Left -
Needed connection to the car
Analog output
A12
Front right speaker (-)
Loudspeaker Front Right -
Needed connection to the car
Analog output
A13
Rear right speaker (-)
Loudspeaker Rear Right -
Needed connection to the car
Analog output
A14
-
-
 
 
A15
-
-
 
 
A16
Door unlock
Door unlock signal from BCM
Needed connection to the car
 
A17
Illumination (-)
Rheostat from vehicle -
Needed connection to the car
 
A18
Remote antenna
Remote supply for motorised antenna
Needed connection to the car
9V ~ 18V

Connector B
No.
Name
Terminal Description
Condition
Specified Condition
B1
CAN high
CAN-H I/F
Needed connection to the car
 
B2
-
-
 
 
B3
-
-
 
 
B4
Steering remocon
STEEL WHEEL REMOTE CONTROL INPUT
Needed connection to the car
0.5V ~ 3V
B5
-
NC(REAR  REMOTE CONTROL INPUT)
Needed connection to the car
 
B6
Camera video input
CAMERA_VIN SIGNAL
Needed connection to the car
 
B7
Camera battery (+)
CAMERA POWER SUPPLY
Needed connection to the car
4.9V ~ 5.5V
B8
AUX R input
AUX ST SOUND R-CH INPUT
Needed connection to the car
A waveform synchronized with sound is output
B9
AUX ref. ground
AUX ST SOUND GND
Needed connection to the car
Below 1 ohm
B10
Mic (+) (Bluetooth)
BLUETOOTH H/F VOICE INPUT PIN
Needed connection to the car
A waveform synchronized with Voice data via MIC
B11
ACC
ACC
Needed connection to the car
11 ~ 14 V
B12
Battery (+)
Fused battery power supply (10A)
Audio Unit Installation
1. Connect the connectors and cable. 2. Install the audio head unit and center fascia panel. 3. Connect the neg ...

Speakers Inspection
1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the s ...

See also:

Components Location
1. Automatic transaxle 2. Inhibitor switch 3. Transaxle Control Module (TCM) 4. Valve body cover 5. Solenoid valve connect 6. Oil temperature sensor 7. Valve body assembly ...

Transaxle Oil Temperature Sensor. Specifications
▷ Type: Negative Thermal Coefficient Type Temp.[(°C)°F] Resistance (kΩ) (-40)-40 48.1 (-20)-4.0 15.6 (0)32.0 5 ...

To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the CRUISE ON-OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch is ...