Kia Soul: Drive Belt Installation - Timing System - Engine Mechanical SystemKia Soul: Drive Belt Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Timing System / Drive Belt Installation

1.
Install the drive belt (A).

2.
Adjust tension by tightening the alternator tension adjust bolt (B) and then install the mounting bilts(A).

Tightening torque
12mm (0.47in) bolt :
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 Ib-ft)
14mm (0.55in) bolt :
29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)

3.
Connect the battery negative terminal.
    Drive Belt Adjustment
    Drive belt tension measurement and adjustment Belt tension measurement Measure the belt tension using a mechanical tension gauge or a sonic tension meter. Tensi ...

    Idler Components
    1. Idler ...

    See also:

    Reccomendations
    Use high quality ethylene glycol coolant Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it hel ...

    Vehicle stability management (VSM)
    This system provides further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient of friction between ...

    Pre-Charge Registor Repair procedures
    Removal     Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery Current Sensor, High Voltage Battery Heater Relay and the High Voltage Battery Heater Fuse are in ...